For use on: Formica, concrete, brick, fully cured varnish and baked enamel paint, metal, glass, PVC, rubber base board.
Hand or skin cleaner
For paint, stain, tar, glue, sap ... etc. Saturate area and let it soak in for 10 to 20 seconds and begin rubbing with your hand or towel until the stain is removed. Reapply if needed. Wash with soap and water to remove any residue.
Signs Use on high performance, intermediate and most reflective vinyl including sign blanks, banners, glass, awnings, PVC, fiberglass. Spray or brush on letters or graphics. Let The Ultimate Wipe-out™dissolve vinyl until it removes easily. Clean off any remaining adhesive. To reapply letters, clean surface with alcohol (soap) and water.
Graffiti: Saturate graffiti for 10 to 30 seconds. Then scrub with towel or brush. Reapply if need. Remove residue with soap and water. On rough concrete surfaces, saturate longer and use a brush or pressure cleaner.
Not recommended for graffiti on painted, polycarbonate ,or plastic surfaces.
Adhesives: Saturate adhesive and remove with cloth or carefully with scraper.
Paper labels: Saturate label for 30-60 seconds. If necessary, use a scraper to facilitate removal.
Over spray: Spray area lightly and let saturate for 30-60 seconds Remove loosened over spray with cloth. On rough concrete surfaces use a brush or pressure cleaner, if necessary. Works on both latex and enamel paints.
Concrete: Saturate stain for a few minutes and use a brush to scrub area. Wash with water (and mild soap if needed). For tough stains a pressure cleaner may be used.
Clean up: After cleaning any wood stains, paint, tar or adhesives from the skin, simply wash off any residue with soap and water.