Dear Customer,

Mavidon strives to use American made products when they are possible. However, many ingredients in production of Collodion and other products are not avaible in the states. The recent developments concerning the Reciprocal Tariff introduced by the U.S. government earlier this week entails additional import duties that will have a direct impact on the cost of importing nitrocellulose, ethyl-ether, alluminum cans and other raw materials. As a result of this measure, the overall cost of importing these raw materials will rise, and this will be reflected in our pricing moving forward.

We fully appreciate the challenges that such changes may pose and wish to assure you that we remain committed to transparency and open communication throughout this transition. Our primary objective is to ensure that you are well-informed and supported during this time. Should you require further information or wish to discuss any concerns in greater detail, please do not hesitate to contact our team.
Thank you for your continued trust and partnership. We greatly value your business.
Sincerely, Tim Carroll, President

The Ultimate Wipe Out

For use on: Formica, concrete, brick, fully cured varnish and baked enamel paint, metal, glass, PVC, rubber base board.

"Hand or skin cleaner For paint, stain, tar, glue, sap ... etc. Saturate area and let it soak in for 10 to 20 seconds and begin rubbing with your hand or towel until the stain is removed. Reapply if needed. Wash with soap and water to remove any residue."

Signs Use on high performance, intermediate and most reflective vinyl including sign blanks, banners, glass, awnings, PVC, fiberglass. Spray or brush on letters or graphics. Let The Ultimate Wipe-out™dissolve vinyl until it removes easily. Clean off any remaining adhesive. To reapply letters, clean surface with alcohol (soap) and water.

Graffiti: Saturate graffiti for 10 to 30 seconds. Then scrub with towel or brush. Reapply if need. Remove residue with soap and water. On rough concrete surfaces, saturate longer and use a brush or pressure cleaner.

Not recommended for graffiti on painted, polycarbonate ,or plastic surfaces.

Adhesives: Saturate adhesive and remove with cloth or carefully with scraper.

Paper labels: Saturate label for 30-60 seconds. If necessary, use a scraper to facilitate removal.

Over spray: Spray area lightly and let saturate for 30-60 seconds Remove loosened over spray with cloth. On rough concrete surfaces use a brush or pressure cleaner, if necessary. Works on both latex and enamel paints.

Concrete: Saturate stain for a few minutes and use a brush to scrub area. Wash with water (and mild soap if needed). For tough stains a pressure cleaner may be used.

Clean up: After cleaning any wood stains, paint, tar or adhesives from the skin, simply wash off any residue with soap and water.

  • The Ultimate Wipe Out

    • The Ultimate Wipe Out

    Mavidon

    $7.85
    (No reviews yet) Write a Review
    SKU:
    WPO
    Adding to cart… category.add_cart_announcement

    Product Description

    Safely Cleans:

    Adhesives: Paper Labels, Paint or Grease: Saturate the area for 30-60 second and remove with cloth or scraper. Repeat if necessary. 

    Gum: Saturate for 2-4 minutes and scrape off.

    Hand or Skin Cleaner (Paint/glue): Saturate area for 10-20 seconds and begin rubbing with your hand or towel until stain is removed. Reapply if needed. Wash with soap and water to remove any residue. If irritation occurs, stop immediately and wash with soap and water.

    Professional Printer Rubber Rollers: A non-abrasive cleaning solvent. Perfect for removing glue buildup deposits, ink, stains & also helps in deglazing rollers. Works with most rubber rollers as well as metal rollers.

    Use on: Formica, concrete, brick, fully cured varnish and baked enamel paint, metal, glass, PVC, rubber base board.

    Graffiti: Saturate graffiti for 10 to 30 seconds. Then scrub with towel or brush. Reapply if need. Remove residue with soap and water. On rough concrete surfaces, saturate longer and use a brush or pressure cleaner.

    Not recommended for graffiti on painted, polycarbonate ,or plastic surfaces.

    Over spray: Spray area lightly and let saturate for 30-60 seconds Remove loosened over spray with cloth. On rough concrete surfaces use a brush or pressure cleaner, if necessary. Works on both latex and enamel paints.

    Product Videos

    Custom Field

    Product Reviews

    Write a Review